Crucial Guidelines To Consider When Installing A Split Air Conditioner

Also known as a ductless AC, a split air conditioner is one of the silent operating ACs you can install because its cooling unit and compressor are separated. Although the market offers a wide range of air conditioners you can consider today, the air conditioning installation process is too complicated. This isn't the same case with split system air conditioners. But, the installation still needs to be done perfectly by a pro so you can get optimum cooling. Moreover, poor installations lead to frequent maintenance issues, and this is a problem you want to avoid since it will shorten the cooling system's lifespan. Consider these tips during the split air conditioning installation.

Assessment and preparation before installation

If you want to benefit from your split AC for longer, consider calling a professional air conditioner installer to help you. The expert will conduct a survey and also determine your cooling needs before installing the unit. The findings are used to help you buy the right split air conditioner that's efficient and effective depending on your budget. Also, they will ensure the wall where the AC will be installed is strong enough to hold the unit in place.

Placement of the indoor and outdoor units

For proper airflow, the expert will make sure there is adequate spacing between the air conditioner and wall. The expert will place the indoor unit at an appropriate height above the surface to make sure the room is cooled as needed.

While fixing the aluminium bracket that holds the unit on the wall, the installation expert will ensure that it's given the correct tilt. This way, the split AC's indoor unit will also be installed at a certain angle that promotes the unobstructed flow of condensed water.

Both the indoor and outdoor units must be located at the right location, far from water and direct sunlight. The outdoor unit should also be placed in an open space to make sure there isn't any hindrance to the heat the condenser dispels.

The outdoor unit should be placed on a rigid and flat surface. This component holds essential components such as the condenser, compressor, fan, motor, among others. If the unit isn't placed in a flat surface, it'll vibrate during operation, leading to the leakage of the coolant, breakage of copper pipes and damage of the condenser/compressor. Moreover, a vibrating unit is noisy, and this will disturb the house occupants and the neighbours too.

Share